TCP/IPv6 Configuration and Management Manual (G06.24+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-008
C-5
Effect. The command is not executed.
Recovery. Select a device that is available or correct the problem.
TCPIPV6 00020
Cause. The device selected for the SUBNET returned a NULL MAC address.
Effect. The command is not executed.
Recovery. Try the operation again.
TCPIPV6 00022
Cause. MAC address is invalid.
Effect. The command is not executed.
Recovery. Use a correct MAC address.
TCPIPV6 00027
Cause. The SUBNET selected does not exist.
Effect. The command is not executed.
Recovery. Use a correct SUBNET name or add the SUBNET and retry the request.
TCPIPV6 00035
Cause. The two SUBNETs configured for failover are not in the same LAN or the
SUBNET is not failover-enabled.
Effect. The command is rejected with the reason.
Recovery. Configure two SUBNETs that have two IP addresses in the same SUBNET
range with failover enabled.
TCPIPV6 E00020 The Device selected for the subnet returned a
NULL MAC address.
TCPIPV6 E00022 Invalid MAC address.
TCPIPV6 E00027 Subnet does not exist.
TCPIPV6 E00035 The subnets configured in the FAILOVER are
invalid.