TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-11
Entering SCF Commands
Table 8-6 lists the sensitive and nonsensitive NonStop TCP/IPv6 SCF commands.
Entering SCF Commands
You start SCF interactively by issuing this TACL command:
1>SCF
You rarely need to specify SCF RUN parameters because the default values are
appropriate for most situations. For a more detailed description of the TACL RUN
command parameters that apply to SCF, see the SCF Reference Manual for G-Series
RVUs or SCF Reference Manual for H-Series RVUs.
At the beginning of an SCF session, SCF displays its product banner, which includes
the HP product name, product number, version number, RVU date, and copyright
statement.
NAMES Command, 8-106 XX
PRIMARY Command
, 8-111 X
STATS Command
, 8-115 XX X
STATUS Command
, 8-170 XX X
STOP Command
, 8-194 X
TRACE Command
, 8-198 X
VERSION Command
, 8-207 X
Table 8-6. Sensitive and Nonsensitive SCF Commands
Sensitive Commands Nonsensitive Commands
ABORT Command
INFO Command
ADD Command LISTOPENS Command
ALTER Command NAMES Command
DELETE Command STATS Command (without the RESET option)
PRIMARY Command
STATUS Command
START Command VERSION Command
STATS Command (with the RESET
option)
STOP Command
TRACE Command
Table 8-5. Commands and Object Types for TCP6SAM (page 2 of 2)
Object Types
SCF
Command PROCESS ROUTE SUBNET