TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-33
ADD SUBNET Command for TCP6MAN

To create an AF_INET6-capable SUBNET and enable it for Ethernet failover,
NONSHAREDIP mode:
-> ADD SUBNET $ZZTCP.*.EN1, TYPE ETHERNET, &
FAMILY INET6, IPV6PREFIX "3ffe:1200:214:1::/64", &
FAILOVER NONSHAREDIP, DEVICENAME LAN21,&
IPV6HOPLIMIT 255

To create an AF_INET6-capable SUBNET and enable it for Ethernet failover,
SHAREDIP mode:
The SUBNET is also enabled to process IPv6 router advertisement messages.
-> ADD SUBNET $ZZTCP.*.EN2, TYPE ETHERNET, &
FAMILY INET6, IPV6RAENABLE ON, &
IPV6PREFIX "3ffe:1200:215:1::/64", &
IPV6INTERFACEID "::ABCD:1234", &
FAILOVER SHAREDIP, DEVICENAME LAN22, &
IPV6HOPLIMIT 255

To create two AF_INET6-capable SUBNETs; one for the default LNP and one for a
configured LNP:
-> ADD SUBNET $ZZTCP.*.SN1, TYPE ETHERNET &
FAMILY INET6,IPV6RAENABLE ON, &
DEVICENAME L019 &
-> ADD SUBNET $ZZTCP.*.SN2, TYPE ETHERNET &
FAMILY INET6, IPV6RAENABLE ON, &
DEVICENAME L01A, LNPTPLIST "$ZSAM1"