TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

What’s New in This Manual
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
xv
Changes in the October 2005 Revision of the
Manual

Updated the SCF error messages TCPIPV6 00047 on page C-8, TCPIPV6 00048,
TCPIPV6 00049, TCPIPV6 00050 on page C-9, TCPIPV6 00051, TCPIPV6 00052,
and added the error message TCPIPV6 00053 on page C-10
Changes in the October 2005 Revision of the Manual

Changed the description of the INFO SUBNET command for TCP6MAN with the
OBEYFORM option under INFO SUBNET Command for TCP6MAN on page 8-89.

Removed the RESET option in the syntax for the STATS PROCESS command for
TCP6SAM under Command Syntax on page 8-144.

Updated the display format of the STATS PROCESS command under STATS
PROCESS for TCP6SAM Display Format on page 8-146:

Modified the Reset Time entry

Removed all the entries for ARP STATS and IGMP STATS and their
descriptions because they are not supported

Replaced the display format of the STATUS MON, DETAIL command under
STATUS MON, DETAIL Display Format on page 8-175.

Changed the description of the TRACE SUBNET command to specify that all
configured SUBNETs are traced (not a single defined SUBNET alone) under
TRACE SUBNET Command for TCP6MAN on page 8-205. Also changed the
description of the example under Examples on page 8-207.

Changed the syntax of these commands in Appendix B, SCF Command Summary:

INFO SUBNET command for TCP6MAN

STATS PROCESS command for TCP6SAM
Changes in the G06.26 and H06.03 Manual

Updated the manual to reflect support for the Integrity NonStop NS-series server.

NonStop TCP/IPv6 no longer requires that you define an SRL before starting the
TCP6SAM (socket access method) process.

Removed the step for defining the SRL from IVA. Prepare to Start the
Applications (Without LNP) on page 1-20, IVB. Prepare to Start the
Applications (With LNP) on page 1-20, Managing the TCP6SAM Process on
page 6-15, TACL Commands for Starting a TCP6SAM Process on page 6-15,
and Example 6-2, SAMUP,
on page 6-16.

Removed the procedure Programmatic Interfaces to the SRL from
ZTCP6REL/ZTCP6SRL (for G-Series RVUs Only)
on page 2-13.

Corrected the title of Example 1-10 on page 1-19.