TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-75
INFO PROCESS Command for TCP6MAN
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS $ZZTCP
is the name of the manager process (TCP6MAN). If you omit the object name,
SCF uses the assumed object name. For information about the ASSUME
command, see the SCF Reference Manual for G-Series RVUs or the SCF
Reference Manual for H-Series RVUs.
DETAIL
specifies that the display is to include additional detailed information on the object.
Examples

To request non-detailed information about the TCP6MAN process:
-> INFO PROCESS $ZZTCP

To request detailed information about the TCP6MAN process:
-> INFO PROCESS $ZZTCP , DETAIL
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command both with and without the
DETAIL option is the same:
PROCESS $ZZTCP
is the name of the manager process (TCP6MAN). If you omit the object name,
SCF uses the assumed object name. For information about the ASSUME
command, see the SCF Reference Manual for G-Series RVUs or the SCF
Reference Manual for H-Series RVUs.
PPID
is the primary processor and PIN of the process.
INFO [ / OUT file-spec / ] [ PROCESS $ZZTCP ] [ , DETAIL ]
TCP6MAN Info Process \SYSTEM.$ZZTCP
PPID............ ( 2,289) BPID................... ( 3,271)