TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-76
INFO PROCESS Command for TCP6SAM
BPID
is the backup processor and PIN of the process.
INFO PROCESS Command for TCP6SAM
This command displays the current attribute settings for the TCP6SAM process.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DETAIL
specifies that the display is to include additional detailed information on the object.
PROCESS TCP6MAN-name
is the name of the socket access method process (TCP6SAM). If you omit the
object name, SCF uses the assumed object name. For information about the
ASSUME command, see the SCF Reference Manual for G-Series RVUs or the
SCF Reference Manual for H-Series RVUs.
Example

To request non-detailed information for the TCP6SAM process named $SAM1:
-> INFO PROCESS $SAM1

To request detailed information for the TCP6SAM process named $SAM1:
-> INFO PROCESS $SAM1 , DETAIL
INFO PROCESS for TCP6SAM Display Format
The format of the display for the INFO PROCESS command (shown in
Example1) is:
INFO [ / OUT file-spec / ] [ PROCESS TCP6SAM-name ]
[, DETAIL]
TCPIPV6 Info PROCESS \MYSYS.$SAM1
*TCPSendSpace *TCPReceiveSpace *UDPSendSpace *UDPReceiveSpace
8192 8192 9216 41600
Note. an asterisk (*) an alterable attribute; however, see Considerations on page 8-81.