TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-77
INFO PROCESS Command for TCP6SAM
INFO PROCESS, DETAIL for TCP6SAM Display Format
The format of the display for the INFO PROCESS, DETAIL command for the second
example is:
TCP Send Space
is the amount of data (in bytes) that can be buffered in the TCP layer when sending
data to a remote site.
TCP Receive Space
is the amount of data (in bytes) that can be buffered in the TCP layer when
receiving data from a remote site.
UDP Send Space
is the amount of data (in bytes) that can be buffered in the UDP layer when
sending data to a remote site.
UDP Receive Space
is the amount of data (in bytes) that can be buffered in the UDP layer when
receiving data from a remote site.
TCPIP Detailed Info PROCESS \
MYSYS.$SAM1
*TCP Send Space ...... 8192 *TCP Receive Space .. 8192
*UDP Send Space ...... 2048 *UDP Receive Space .. 4128
*Delay Ack Time....... 20 *Delay Ack........... ON
*Keep Alive Idle...... 7200 *Keep Alive Retry Cnt 8
*Keep Alive Interval.. 75 QIO Limit........... 100%
*Host Id.............. 0D
*Host Name ........... tcp0
Program Filename..... \
MYSYS.$SYSTEM.SYS02.TCP6SAM
*Debug ............... OFF
*Full Dump............ ON
*All Nets Are Local... ON
*TCP Compat 42........ ON
*EXPAND Security...... OFF
*TCP Path MTU......... OFF
*TCP Time Wait........ 60
Trace Status.......... OFF
Trace Filename .......
*RFC1323 Enable ...... ON
*TCP Init Rexmit Timeout 1000 ms
*TCP Min Rexmit Timeout. 400 ms
*TCP Listen Queue Min... 128
*Initial TTL............ 6
*ARPTIMER-REFRESHED..... OFF