TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-78
INFO PROCESS Command for TCP6SAM
Delay Ack Time
is the amount of time (in.01-second units) that acknowledgments are delayed.
Delay Ack
indicates whether the acknowledgment (ACK) should be delayed when a TCP
packet is received from a remote site.
Keep Alive Idle
is the amount of time, in seconds, before TCP issues a keep-alive packet on
sockets that have enabled this option.
Keep Alive Retry Cnt
is the number of times a keep-alive packet is sent without receiving an
acknowledgment. When this value is exceeded, the TCP connection is dropped.
Keep Alive Interval
is the time interval, in seconds, between retransmissions of unacknowledged keep-
alive packets.
QIO Limit
is a percentage between 0 and 100, representing the amount of queued I/O or
shared memory allowed to this process. This attribute is not used by NonStop
TCP/IPv6. The default is 100 percent.
Host ID
identifies the host by number.
Host Name
is the host on which the NonStop TCP/IPv6 subsystem is running.
Program Filename
is the name of the file being executed for this process.
Debug
is the current setting (ON or OFF) of the DEBUG attribute. Debug is used by HP
support and development personnel.
Full Dump
is the current setting (ON or OFF) of the FULLDUMP attribute.