TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-85
INFO ROUTE Command for TCP6MAN
Type
indicates one of these:
Metric
indicates the number of “hops” to the destination.
INFO ROUTE With OBEYFORM Display Format
This display shows the output of the INFO ROUTE command shown in the second
example:
blank routes to a network.
H host Route
G gateway Route
C route with cloning capability
c route cloned from a Cloning Route.
S manually generated route.
L route generated by ARP logic (Link level route).
R route generated by IRDP logic. If ICMP Router
Discovery Protocol (IRDP) is enabled on a SUBNET,
default routes discovered by IRDP is indicated as
Type Gateway/Router (G, R).
D route generated from the redirect (route redirect)
logic.
ADD ROUTE MR3 , DESTINATION 155.186.70.0 ,&
GATEWAY 172.17.215.1 , NETMASK %FFFFFF00 ,&
METRIC 1
ADD ROUTE MR4 , DESTINATION 155.186.70.0 ,&
GATEWAY 172.17.215.2 , NETMASK %FFFFFF00 ,&
METRIC 1
ADD ROUTE MR5 , DESTINATION 130.186.0.0 ,&
GATEWAY 172.17.215.2 , NETMASK %FFFF0000 ,&
METRIC 1
ADD ROUTE DEF , DESTINATION 0 ,&
GATEWAY 172.17.215.2 , NETMASK %00000000 ,&
METRIC 1