TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-86
INFO ROUTE Command for TCP6SAM
Considerations

The implicit route generated internally from the ADD SUBNET command has the
cloning flag set. For a detailed description of the cloning capability of a route, see
the ADD ROUTE help text.

Link level routes, generated internally by the ARP logic, cannot be stopped
externally through the SCF ABORT or STOP ROUTE commands but can be
deleted externally through the SCF DELETE ROUTE command.
INFO ROUTE Command for TCP6SAM
The INFO ROUTE command displays attribute settings for the specified route(s)
configured on the TCP6MON object in the TCP6SAM primary processor. This is a
nonsensitive command.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ROUTE $TCP6SAM-name.route-name
is the name of the route. If you omit the object name, SCF uses the assumed
object name. You do not need to ASSUME the MON object; if you omit it, the wild
card (*) is assumed. For information about the ASSUME command, see the SCF
Reference Manual for G-Series RVUs or the SCF Reference Manual for H-Series
RVUs.
Examples
To display the attributes of routes configured in the processor in which the TCP6SAM
process named $ZSAM2 is running:
-> INFO ROUTE $ZSAM2.*
INFO [ /OUT file-spec/ ] [ ROUTE $TCP6SAM-name.route-name ]