TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-89
INFO SUBNET Command for TCP6MAN
INFO SUBNET Command for TCP6MAN
The INFO SUBNET command displays the current attribute values for the specified
SUBNETs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $ZZTCP.#ZPTMn.subnet-name
is the name of the SUBNET. To obtain info about the SUBNETs on all configured
TCP6MONs, use the wild-card (*) notation for the TCP6MON name. For example,
INFO SUBNET $ZZTCP.*.SN1. To obtain information about the SUBNET on one
TCP6MON, qualify the TCP6MON name. For example, INFO SUBNET
$ZZTCP.#ZPTM1.SN1.
If you omit the object name, SCF uses the assumed object name. For information
about the ASSUME command, see the SCF Reference Manual for G-Series RVUs
or the SCF Reference Manual for H-Series RVUs.
DETAIL
specifies that the display is to include additional detailed information about the
object.
FAMILY { INTET | INET6 }
specifies SUBNET information related either to the IPv4 protocol (INET) or to the
IPv6 protocol (INET6).
If you specify subnet-name with a wild card (*) and also specify INET, the
resulting display shows only information and attribute settings related to the IPv4
protocol.
If you specify subnet-name with a wild card (*) and also specify INET6, the
resulting display shows only information and attribute settings related to the IPv6
protocol.
If you specify subnet-name with a wild card (*) and do not specify the FAMILY
attribute, information and attribute settings are displayed for both address families:
INET (IPv4) and INET6 (IPv6)
INFO [ / OUT file-spec / ] [SUBNET $ZZTCP.#ZPTMn.subnet-name]
[, DETAIL | , FAMILY { INET |
INET6 } ] |
[, OBEYFORM]