TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-90
INFO SUBNET Command for TCP6MAN
OBEYFORM
causes the SUBNET configuration to be displayed in ADD SUBNET and ALTER
SUBNET formats so that this configuration can be re-created.
Examples

To return information about a specific SUBNET:
-> INFO SUBNET $ZZTCP.#ZPTM1.SN1

To return information about all running SUBNETs on the system:
-> INFO SUBNET $ZZTCP.#ZPTM3.*

To return detailed information about a specific SUBNET:
-> INFO SUBNET $ZZTCP.#ZPTM3.SN2, DETAIL

To return detailed information about all running SUBNETs on the system:
-> INFO SUBNET $ZZTCP.#ZPTM3.*, DETAIL

To display the SUBNET configuration in ADD SUBNET and ALTER SUBNET
formats:
-> INFO SUBNET *, OBEYFORM
INFO SUBNET for TCP6MAN Display Format (Specific
SUBNET)
The format of the display for INFO SUBNET command is:
Name
is the name of the SUBNET.
Devicename
is the name of the SLSA LIF that provides access to the Ethernet LAN. Note that
with loopback SUBNETs, the value \NOSYS.NOIOP, meaning no system, no
device name, is displayed. This value is displayed because loopback SUBNETs
are routed internally so that there is no device name to display.
TCPIPV6 Info SUBNET \MYSYS.$ZZTCP.#ZPTM3.*
AF_INET:
Name Devicename *IPADDRESS TYPE *SUBNETMASK *R
SN1 \MYSYS.LAN12 172.16.214.27 ETHERNET %HFFFFFF00 N
Note. An asterisk (*) represents an alterable attribute.