TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-95
INFO SUBNET Command for TCP6MAN
TYPE
is the SUBNET type. Possible values are Ethernet, loopback, and tunnel (either
automatic or configured).
SUBNETMASK
is a 32-bit integer that specifies which portion of the network number and the IP
host address is to be masked to define a SUBNET.
Trace Status
shows whether the SUBNET is being traced. ON indicates that it is being traced.
Trace Filename
is the name of the current trace file.
Interface MTU
is the maximum transmission unit that can be used on the SUBNET.
LNP
lists the TCP6SAM names associated with the SUBNET or DEFAULT if none are
associated.
INDEX
lists which logical network partition the SUBNET is on.
R
shows whether or not the ICMP Router Discovery Protocol (IRDP) has been
enabled on the SUBNET. The displayed value can be Y (IRDP is ON), or N (IRDP
is OFF).
Multicast Groups
is the list of multicast addresses joined by applications. For information about
joining multicast groups and other aspects of multicast addressing, see the TCP/IP
Programming Manual.
State
is the filter registration state. The possible state values are: STARTED, STARTING,
and STOPPED.
LinkLevelAddress
is the IPv6 Link Local address of the interface/SUBNET.