TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-98
INFO SUBNET Command for TCP6SAM
INFO SUBNET for TCP6MAN with the OBEYFORM Display
Format
The format of the display for the INFO SUBNET, OBEYFORM command is:
INFO SUBNET Command for TCP6SAM
The INFO SUBNET command displays attribute settings for the specified SUBNET(s)
configured in the TCP6SAM primary processor.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $TCP6SAM-name.subnet-name
is the name of the SUBNET. To obtain info about all SUBNETs configured for the
TCP6SAM process, use the wild-card (*) notation. For example, INFO SUBNET
$ZTC1.*. If you omit the object name, SCF uses the assumed object name. For
information about the ASSUME command, see the SCF Reference Manual for G-
Series RVUs or the SCF Reference Manual for H-Series RVUs.
ALTER SUBNET LOOP0 , IPADDRESS 127.0.0.1
ADD SUBNET EN1 , TYPE ETHERNET,&
IPADDRESS 172.17.222.15 , SUBNETMASK %HFFFFFF00 ,&
DEVICENAME \MYSYS.LANLIF1, FAILOVER NONSHAREDIP
ALTER SUBNET EN1 , ASSOCIATESUB "EN2"
ALTER SUBNET EN1 , ADDALIAS 172.17.222.120
ALTER SUBNET EN1 , ADDALIAS 172.17.222.121
ALTER SUBNET EN1 , ADDALIAS 172.17.222.122
ALTER SUBNET EN1 , ADDALIAS 172.17.222.123
ALTER SUBNET EN1 , ADDALIAS 172.17.222.124
ALTER SUBNET EN1 , ADDALIAS 172.17.222.125
ALTER SUBNET EN1 , ADDALIAS 172.17.222.126
ALTER SUBNET EN1 , ADDALIAS 172.17.222.127
ADD SUBNET EN2 , TYPE ETHERNET,&
IPADDRESS 172.17.222.16 , SUBNETMASK %HFFFFFF00 ,&
DEVICENAME \MYSYS.LANLIF2, FAILOVER NONSHAREDIP
ALTER SUBNET EN2 , ASSOCIATESUB "EN1"
INFO [ / OUT file-spec / ]
[ SUBNET $TCP6SAM-name.subnet-name ]
[, DETAIL ]