TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6

HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012

8-110

NAMES SUBNET Command for TCP6SAM

NAMES SUBNET for TCP6SAM displays the names of the SUBNETs configured on

the TCP6MON process in the same processor.

Command Syntax

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

SUBNET $TCP6SAM-name.subnet-name

is the name of the SUBNET. The fully-qualified name of the SUBNET for

TCP6SAM is $TCP6SAM-name.subnet-name. If you omit the process name,

SCF uses the assumed object name. For information about the ASSUME

command, see the SCF Reference Manual for G-Series RVUs or the SCF

Reference Manual for H-Series RVUs. You can substitute the wild card (*) for the

SUBNET name which yields the SUBNET names on all configured SUBNETs.

Example

To request the names of the SUBNETs associated with $ZTC1:

SCF> NAMES SUBNET $ZTC1.*

NAMES SUBNET for TCP6SAM Display Format

The format of the display for the NAMES SUBNET command is:

NAMES [ / OUT file-spec / ] [ SUBNET $TCP6SAM-name.* ]

TCPIP Names SUBNET \MYSYS.$ZTC1.*

SUBNET

#LOOP0 #EN1 #EN2