TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-152
STATS PROCESS Command for TCP6SAM
Window Probe PKTs Recv
is the number of window-probes packets received.
Window Update Pkts
is the number of window update packets received.
Description of Statistics for the UDP Layer (in Alphabetic Order)
Bad Checksum
is the number of packets received with invalid checksum values. An invalid
checksum is usually caused by a noisy link.
Bad Packet Size
is the number of packets received that contain either more or less data than has
been specified in their headers. This error indicates the sender has a protocol error
or that the receiver has a byte-ordering problem.
Input Packets Dropped
is the number of packets not forwarded to socket applications because of receive
socket space being full.
Invalid Header Size
is the number of packets received with invalid header size. This error indicates a
problem between IP and UDP.
Output Packets Dropped
is the number of packets not sent because of interface problems.
Total Packets Input
is the number of packets received.
Total Packets Output
is the number of packets sent to the IP layer.
Description of Statistics for the IP Layer (in Alphabetic Order)
Bad Checksum
is the number of packets received with invalid checksum values. An invalid
checksum is usually caused by a noisy link.