TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-172
STATUS ENTRY Command for TCP6MAN
STATUS ENTRY Display
The format of the display for the STATUS ENTRY command shown in the example is:
For FAMILY INET (IPv4)
Name
is the name of the entry. The entry type is indicated in parentheses to the right of
the name.
IPADDRESS
is the IPv4 address of the entry in dotted decimal format.
Arp Timer
is the time in minutes left to expire.
Arp Flags
is the state of the ARP table entry; possible values are: completed, permanent, or
in use.
MacAddress
is the MAC address of the entry in hexadecimal format.
ALLENTRY
indicates, when ON, that the entry was added through an SCF ADD command and
that the command specified the ALLENTRY option.
Associated Subnet
indicates the SUBNET with which this entry is associated.
For FAMILY INET6 (IPv6)
IPV6ADDRESS
is the corresponding remote IPv6 address associated with this ND6 cache.
Name:EA1 (ARP) IPADDRESS........ 172.16.119.1
Arp Timer........... 19 (Min) Arp Flags........ (INUSE,COM)
MacAddress.......... %H00 000C 3920CE ALLENTRY - OFF
Associated Subnet... EN1
Name: ND1_1 (ND6) IPV6ADDRESS fe80::208:a4ff:fe2b:3008
ND6 Timer........... 38 (Sec) ND6 State - STALE
MacAddress.......... %H00 0000 000000 ALLENTRY - OFF
Associated Subnet... EN1