TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-178
STATUS PROCESS Command for TCP6MAN
STOPPED
indicates that multicast is not operational for the group.
TCP6SAM
is the TCP6SAM process with which the socket is associated.
LNP INDEX
is the logical network partition index with which the TCP6SAM process is
associated.
Filterv4
is the IPv4 filter name and state of the filter being used. This field is used by
support personnel for debugging purposes. This field does not appear if the socket
is using the loopback interface.
Filterv6
is the IPv6 filter name and state of the filter being used. This field is used by
support personnel for debugging purposes. This field does not appear if the socket
is using the loopback interface.
STATUS PROCESS Command for TCP6MAN
The STATUS PROCESS command displays the TCP6MAN's primary and backup
information.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS $ZZTCP
is the name of the TCP6MAN process. If you omit the object name, SCF uses the
assumed object name. For information about the ASSUME command, see the
SCF Reference Manual for G-Series RVUs or the SCF Reference Manual for H-
Series RVUs.
Example
To display the primary and backup information for the TCP6MAN process, $ZZTCP:
-> STATUS PROCESS $ZZTCP
STATUS [ / OUT file spec / ] [ PROCESS $ZZTCP ]