TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-182
STATUS ROUTE Command for TCP6MAN
Fport
is the foreign port number for either TCP or UDP, depending on the value of Proto.
The more common port values are displayed in text form; others are displayed as
four-decimal octets.
SendQ
is the number of bytes of data in the send queue of the socket.
RecvQ
is the number of bytes of data in the receive queue of the socket.
Multicast Groups
indicates the IP multicast group addresses that the NonStop TCP/IPv6 connection
is listening to. For information about multicast addressing, see the TCP/IP
Programming Manual
Multicast Group States
is the state of the multicast groups. Possible values are (For information about
multicast addressing, see the TCP/IP Programming Manual):
STARTED
indicates that multicast is operational for the group.
STARTING
indicates that the multicast group is transitioning to the STARTED (and
operational) state but is not yet fully operational.
STOPPED
indicates that multicast is not operational for the group.
STATUS ROUTE Command for TCP6MAN
The STATUS ROUTE command displays the current status of the specified routes on a
given TCP6MON or on all configured TCP6MONs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
STATUS [ / OUT file spec / ] [ROUTE $ZZTCP.#ZPTMn.route-name]
[ FAMILY { INET | INET6 } ]