TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-186
STATUS SUBNET Command for TCP6MAN
STATUS ROUTE for TCP6SAM Display Format
The format of the display for the STATUS ROUTE command is:
Name
is the name of the route.
Status
is the summary state of the route.
Considerations
A pound sign (#) precedes the ROUTE name for backward compatibility with
applications that expect this naming convention for ROUTEs. See Supported
Commands and Object Types on page 8-10.
STATUS SUBNET Command for TCP6MAN
The STATUS SUBNET command displays the current status of the specified
SUBNETs.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBNET $ZZTCP.#ZPTMn.subnet-name
is the specification of the SUBNET. The fully-qualified SUBNET name for
TCP6MAN is $ZZTCP.#ZPTMn.subnet-name. To obtain information about a
SUBNET’s status in all TCP6MONs, substitute the wild card (*) for the TCP6MON
name. To obtain information about all running SUBNETs, substitute the wild card
(*) for both the TCP6MON name and the SUBNET name.
TCPIP Status ROUTE \MYSYS.$ZTC1.*
Name Status RefCnt
#RT2 STARTED 1D
#RT3 STARTED 0D
#DA2_2 STARTED 0D
STATUS [ / OUT file spec / ]
[SUBNET $ZZTCP.#ZPTMn.subnet-name] [, DETAIL ]