TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Reference for NonStop TCP/IPv6
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
8-209
Example2:
Example2:
Consider the following TRACE SUBNET command:
SCF> TRACE SUBNET #ZPTM1.*, TO $SYSA.TRACES.TCPSUB, SELECT ALL,
PAGES 1024, RECSIZE 4050
The valid and invalid combinations are:
For invalid commands, the trace command returns the following error message:
"TCPIPV6 E-00006 Command sequence invalid for <object-name>"
VERSION Command
The VERSION command displays the NonStop TCP/IPv6 subsystem version number,
product name, product number, and RVU date. Use the DETAIL option to display this
information about the NonStop operating system, the SCF Kernel, and the NonStop
TCP/IPv6 product module.
This is a nonsensitive command.
VERSION MON Command for TCP6MAN
The VERSION MON command displays the version level of the TCP6MON object.
TRACE SUBNET #ZPTM1.*, SELECT ALL INVALID
TRACE SUBNET #ZPTM1.SN?, STOP INVALID
TRACE SUBNET #ZPTM1.*, STOP INVALID
Command Category
TRACE SUBNET #ZPTM1.*,STOP VALID
TRACE SUBNET #ZPTM1.SN2, SELECT ALL INVALID
TRACE SUBNET #ZPTM1.SN1,STOP INVALID