TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
C-2
TCPIPV6 00005
attribute-name
is the name of the attribute you specified in an ALTER PROCESS command.
Cause. You specified a value for the ALTER PROCESS command that is outside the
valid range.
Effect. The command is not executed.
Recovery. Enter a valid range for the command and retry it. For more information on
valid ranges, see ALTER Command on page 8-41.
TCPIPV6 00007
Cause. The IP address you specified in the ADD SUBNET or ALTER SUBNET
command is already being used by another interface.
Effect. The command is not executed.
Recovery. Specify a different IP address and retry the command.
TCPIPV6 00008
Cause. The gateway you specified in the ADD ROUTE command is unavailable.
Effect. The command is not executed.
Recovery. Specify an available gateway and retry the command.
TCPIPV6 00009
Cause. A file-system error occurred.
Effect. The command is not executed.
Recovery. Take an action based on the file system error received.
TCPIPV6 E00005 Attribute value out of range attribute-name.
TCPIPV6 E00007 Duplicate address.
TCPIPV6 E00008 Gateway Network Unreachable.
TCPIPV6 E00009 Filesystem error.