TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
C-8
TCPIPV6 00042
Cause. The SUBNET is not enabled for IPv6.
Effect. The command is rejected with the reason.
Recovery. : Reissue the command with the SUBNET in the correct state.
TCPIPV6 00043
Cause. The IPv6 address specified in the command is not valid.
Effect. The command is rejected with the reason.
Recovery. Reissue the command with the correct IP address.
TCPIPV6 00044
Cause. The command requires that an IPv4 address is available in the system.
Effect. The command is rejected with the reason.
Recovery. Add a SUBNET with the IPv4 address to the system and reissue the
command.
TCPIPV6 00045
Cause. The IPv6 prefix specified is not valid.
Effect. The command is rejected with the reason.
Recovery. Reissue the command with a correct IPv6 prefix.
TCPIPV6 E00042 The subnet state is invalid for configuring
AF_INET6.
TCPIPV6 E00043 The IPv6 address specified in the command is
not valid.
TCPIPV6 E00044 This command requires IPv4 address to be
configured.
TCPIPV6 E00045 The IPv6 prefix specified in the command is
invalid.