TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
C-9
TCPIPV6 00046
Cause. The command is rejected because of an invalid IPv6 route destination or
gateway address.
Effect. The command is rejected with the reason.
Recovery. Reissue the command with a correct IPv6 route destination or gateway
address.
TCPIPV6 00047
Cause. The system was configured to operate in INET6 mode only and a command
for INET mode was received.
Effect. The command is rejected with the reason.
Recovery. Reconfigure the NonStop TCP/IPv6 subsystem in INET or DUAL mode and
reissue the command.
TCPIPV6 00048
Cause. The system was configured to operate in IPv4 mode only and a command for
INET6 mode was received.
Effect. The command is rejected with the reason.
Recovery. Reconfigure the NonStop TCP/IPv6 subsystem in INET6 or DUAL mode
and reissue the command.
TCPIPV6 00049
Cause. The command is rejected because:

The system was already configured with IPv6 SUBNETs and cannot be changed to
IPv4-only mode.
TCPIPV6 E00046 The IPv6 route destination or gateway address
is invalid.
TCPIPV6 E00047 The system is not configured to operate in
IPv4 mode.
TCPIPV6 E00048 The system is not configured to operate in
IPV6 mode.
TCPIPV6 E00049 Switching the mode is not allowed with the
current configuration.