TCP/IPv6 Configuration and Management Manual (G06.29+, H06.03+, J06.03+)

SCF Error Messages
HP NonStop TCP/IPv6 Configuration and Management Manual—524523-012
C-12
Effect. The ADD SUBNET command is not executed.
Recovery. Reissue the command specifying no more than two TCP6SAM names in
the LNPTPLIST attribute.
TCPIPV6 00057
Cause. The ADD SUBNET command was rejected because the LNP name is not the
correct format for a TCP6SAM name.
Effect. The ADD SUBNET command is not performed.
Recovery. Reissue the command in the correct TCP6SAM name format.
TCPIPV6 00058
Cause. The ADD SUBNET command is rejected because the two SUBNETs are not
on the same LNP.
Effect. The ADD SUBNET command is not executed.
Recovery. Delete and read the SUBNETs using the same TCP6SAM process names
specified for the LNPTPLIST attribute.
TCPIPV6 E00057 LNP TCP6SAM name format error.
TCPIPV6 E00058 The FAILOVER brother is not on the same LNP.