TCP/IPv6 Migration Guide

Transport-Service Provider Differences for NonStop
TCP/IPv6
HP NonStop TCP/IPv6 Migration Guide—524524-004
2-3
Logical Network Partitioning (LNP)
including the default LNP. In the following example, the field shown in bold in the
display shows that one LNP is configured:
To find out which TCP6SAM processes are configured for which LNPs, use the INFO
SUBNET *, DETAIL command. In the following example, the fields shown in bold
show that the TCP6SAM processes associated with LNP index 1 are $ZSAM1 and
TCPIPV6 DETAILED INFO MON \BEAR.$ZZTCP.#ZPTM2
*TCP SEND SPACE ...... 61440D *TCP RECEIVE SPACE .. 61440D
*UDP SEND SPACE ...... 9216D *UDP RECEIVE SPACE .. 42080D
*DELAY ACK TIME....... 20 *DELAY ACK........... ON
*KEEP ALIVE IDLE...... 75 *KEEP ALIVE RETRY CNT 8
*KEEP ALIVE INTERVAL.. 75 QIO LIMIT........... 100%
*HOST ID.............. 0D
*HOST NAME ........... TCP0
PROGRAM FILENAME..... \BEAR.$SYSTEM.SYS02.TCPMON
*DEBUG ............... OFF
*FULL DUMP............ ON
*ALL NETS ARE LOCAL... ON
*TCP COMPAT 42........ ON
*EXPAND SECURITY...... OFF
*TCP PATH MTU......... OFF
*TCP TIME WAIT........ 60
TRACE STATUS.......... OFF
TRACE FILENAME .......
*RFC1323 ENABLE ...... ON
*TCP INIT REXMIT TIMEOUT 1000 MS
*TCP MIN REXMIT TIMEOUT. 1000 MS
*TCP LISTEN QUEUE MIN... 128
*INITIAL TTL............ 60
*MIN-EPHEMERAL-PORT..... 1024
*MAX-EPHEMERAL-PORT..... 65024
*MAX-PRIV-PORT.......... 1023
*TCPCWNDMULTIPLIER...... 2
*TCP SACK............... OFF
*NONSHAREDOUTDIST....... OFF
*FAMILY DUAL
TOTAL LNPS CONFIGURED.. 1
*TCP MAX REXMIT TIME.... 64000 MS
*TCP MAX REXMIT COUNT... 12
*TCP TOTAL REXMIT DURATION. 720000 MS