TCP/IPv6 Migration Guide

Transport-Service Provider Differences for NonStop
TCP/IPv6
HP NonStop TCP/IPv6 Migration Guide—524524-004
2-4
Logical Network Partitioning (LNP)
$ZSAM2. The INFO SUBNET DETAIL command also shows the IP addresses for the
LNPs.
Note that you cannot determine the names of the TCP6SAM processes for the default
partition in this manner because they are not listed in the INFO SUBNET DETAIL
command. To determine the TCP6SAM process names for the default partition
(partition index number 0), perform the following additional steps:
1. Write down the TCP6SAM process names that are listed in the LNP field of the
INFO DEFAULT display.
2. Issue the SCF LISTDEV TCPIP command.
3. Use your list of TCP6SAM names to eliminate the LNP-assigned TCP6SAM
processes. The remaining TCP6SAM processes are associated with the default
LNP. These processes have access only to the SUBNETs in the default partition.
TCPIPV6 DETAILED INFO SUBNET \MYSYS.$ZZTCP.#ZPTM0.SN1
AF_INET:
NAME DEVICENAME *IPADDRESS/DST_IPADDR TYPE *SUBNETMASK *R
SN1 \MYSYS.LAN13 152.10.215.48 ETHERNET %HFFFFFF00 N
TRACE STATUS ........ OFF
TRACE FILENAME ......
INTERFACE MTU ....... 1500
LNP... DEFAULT INDEX... 0
-> INFO SUBNET $ZZTCP.#ZPTM0.SN3, DETAIL
TCPIPV6 DETAILED INFO SUBNET \MYSYS.$ZZTCP.#ZPTM0.SN3
AF_INET:
NAME DEVICENAME *IPADDRESS/DST_IPADDR TYPE *SUBNETMASK *R
SN3 \MYSYS.LAN14 152.10.215.49 ETHERNET %HFFFFFF00 N
TRACE STATUS ........ OFF
TRACE FILENAME ......
INTERFACE MTU ....... 1500
LNP... $ZSAM1 $ZSAM2 INDEX... 1
AF_INET6:
NAME DEVICENAME LINKLEVELADDRESS TYPE
SN3 \MYSYS.LAN14 FE80::A10:8EFF:FE00:9B23 ETHERNET
*IPV6MTU................... 1500
*IPV6HOPLIMIT.............. 64
*IPV6REACHABLETIME......... 30000 MS
*IPV6RETRANSMITIMER........ 1000 MS
*IPV6DADRETRIES............ 1
*IPV6NUD................... ON
*IPV6RAENABLE.............. ON
LNP... $ZSAM1 $ZSAM2 INDEX... 1
MULTICASTADDRESS.. FF02::1:FF00:9B23
MULTICASTADDRESS.. FF02::1