Telserv Manual

Accessing and Using Telserv Services
Telserv Manual—427174-009
7-3
ASCII and Binary Mode
2. From the Welcome banner screen, use ENTER CHOICE to select a service
application, such as TACL
WELCOME To idev [PORT $ZTC5 #23 WINDOW $ZTN5.#PTT7HET]
TELSERV - T9553D40 - (10SEP00) - (IPMADD)
Available Service:
TACL EXIT
Enter Choice>
3. Log on to the NonStop system.
4. Press control escape; that is, press caret (^) and left angle bracket (]).
5. The TELNET prompt appears
telnet>
6. To see a description of the toggle options, type the following TELNET client
command:
telnet> toggle ?
Toggle option are described in toggle Command on page 9-6.
7. If you want a display of options as they are processed, issue the following
command before issuing the command described in Step 8.
telnet> toggle options
8. When your current session is in ASCII mode, switch to binary mode by issuing the
following TELNET client command:
telnet> toggle binary
9. If you have issued the toggle options command prior to issuing the toggle
binary command, the following display appears:
Negotiating binary mode with remote host
SENT DO BINARY
SENT WILL BINARY
RCVD WILL BINARY
RCVD DO BINARY
10. Press RETURN to go back to the service application prompt, for example:
TACL>
11. To toggle back to ASCII mode, repeat steps 4, 5, 7, and 8. The following display
appears:
Negotiating binary mode with remote host
SENT DONT BINARY
SENT WONT BINARY
RCVD WONT BINARY
RCVD DONT BINARY