Telserv Manual

Telserv Error Messages Sent to Terminals
Telserv Manual—427174-009
A-3
TELNET Error Messages
Recovery. If you did not terminate the session, try to reconnect again later.
Cause. A file-system error occurred when TELNET tried to open the virtual terminal
file process.
Effect. The connection that you requested is not made.
Recovery. See Recovering From Errors at the beginning of this appendix.
Cause. A read error occurred when TELNET tried to read the specified file.
Effect. The operation failed.
Recovery. See “Recovering From Errors” at the beginning of this appendix.
Cause. A communications problem has occurred. The TCP/IP process might not be
running; for example, an operator might have stopped it.
Effect. TELNET terminates.
Recovery. Ask your system administrator if the TCP/IP process is running. See
“Recovering From Errors” at the beginning of this appendix.
Cause. A communications problem has occurred. The TCP/IP process might not be
running; for example, an operator might have stopped it.
Effect. TELNET terminates.
Recovery. Ask your system administrator if the TCP/IP process is running. See
Recovering From Errors
at the beginning of this appendix.
Cause. A communications problem has occurred. The TCP/IP process might not be
running; for example, an operator might have stopped it.
Open of my-term error error-number
READX error (error-number) on term fd file-number
setsockopt can't wait: error-reason
setsockopt failure: error-reason
setsockopt SO_DEBUG: error-reason