Telserv Manual

Telserv Error Messages Sent to Terminals
Telserv Manual—427174-009
A-8
Telserv Error Messages
Cause. There has been no activity at this terminal for a long period.
Effect. The connection to the system is terminated. This error message is sent after
several warning messages.
Recovery. Connect again and maintain activity on the terminal, or ask the system
administrator to use SCF to disable the banner time-out value or the time-out value for
the process.
Cause. All CPUs specified in the CPULIST attribute of the SCF PROCESS object are
down.
Effect. The application is launched on another available CPU.
Recovery. As a terminal user, you can take no direct action. Ask the operator to bring
up the CPU s specified in the CPULIST attribute or ask the system administrator to
modify CPULIST so that it specifies available CPUs.
Cause. The Telserv process could not launch the login server because of a memory
allocation failure or because Telserv is busy.
Effect. You cannot launch the chosen application.
Recovery. As a terminal user, you can take no direct action. Ask the system
administrator to reduce the load on Telserv or free up some memory.
Cause. Internal data corruption occurred in the Telserv process.
Effect. Neither the Welcome Banner nor the Service Menu appears.
Recovery. Try connecting again. If the problem persists, ask the operator to restart the
Telserv process. Contact the system administrator.
Terminal was idle too long! Disconnecting...
Sorry, none of the CPUs configured are available.
Trying to launch on available CPUs...
Sorry, cannot launch login server
Aborting window due to internal server error..