Telserv Manual

Starting the Telserv Process
Telserv Manual—427174-009
3-6
Telserv Parameter Names and Values for the TACL
PARAM Command
ZTNT^KEEPALIVE^OFF Specifies whether to disable the KEEPALIVE
socket option. Values are YES or NO. The default
value is NO.
The syntax is:
PARAM ZTNT^KEEPALIVE^OFF (YES | NO)
Setting the PARAM value to YES disables the
KEEPALIVE functionality.
Setting the PARAM value to NO or allowing it to
default enables the KEEPALIVE socket
functionality.
Use caution when disabling the KEEPALIVE
option. Because the setting is on a process level, it
will affect other clients that rely on “keep-alive” for
recovery and other purposes. Note that Telserv will
not be notified of all terminal disconnections.
Therefore, use the idle timer or the banner inactiv-
ity timer or both to close sessions after a fixed
period of time. Use SCF to configure both the idle
timer and the banner inactivity timer.
Note that in SCF, the idle timer is displayed as Tim-
eout Value and the banner inactivity timer is dis-
played as Banner Timeout value.
Table 3-1. Telserv Parameter Names and Values in the TACL PARAM
Command (page5of9)
Name Description