Telserv Manual

Subsystem Control Facility (SCF) Commands for
Telserv
Telserv Manual—427174-009
5-22
INFO PROCESS Command
INFO PROCESS Command
The syntax for the INFO PROCESS command is:
The display for the INFO PROCESS command without the DETAIL option is:
Max Terminals
is the maximum number of terminals that can be present in the system.
Total Terminals
is the actual number of terminals.
Timeout Value
is the number of minutes after which inactive terminals are disconnected. If inactive
terminals are not to be disconnected, this value is displayed as N/A.
Port
is the local TCP port number this process is using.
The display for the INFO PROCESS command with the DETAIL option is:
PCPU
is the primary process CPU.
INFO [ / OUT file-spec / ] PROCESS process-name
[ , SUB [ NONE | ALL | ONLY ] ] [ , DETAIL ]
TELSERV Info PROCESS
*Max Terminals Total Terminals *Timeout Value Port
256 0 3 9876
TELSERV Detailed Info PROCESS \SYS1.$MTNT
PCPU................... 11 BCPU................... N/A
PPIN................... 379 BPIN................... N/A
TACL................... ON Transport Process...... $ZTC0
*Menu................... ON Transport Type......... TCP/IP
*Timeout Value.......... N/A Port................... 4040
*Banner Timeout Value... N/A Total Services......... 2
*Max Terminals.......... 256 Total Terminals........ 2
Program................ . \SYS1.$DISK2.MYTWD21.TELSERV
*CPU List................. 0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,9 ,10 ,11 ,12 ,13
,14 ,15, ,16
*DROPCR.................. ON