Telserv Manual

Subsystem Control Facility (SCF) Commands for

Telserv

Telserv Manual—427174-009

5-23

INFO PROCESS Command

BCPU

is the backup process CPU.

PPIN

is the primary process PIN.

BPIN

is the backup process PIN.

TACL

ON indicates that TACL should be one of the services listed in the service menu at

the beginning of an incoming session.

Transport Process

is the name of the transport process in use.

is the service menu. ON indicates the service menu should be displayed at the

beginning of an incoming session. OFF indicates the service menu should not be

displayed at the beginning of an incoming session.

Transport Type

indicates the type of transport process, either TCP/IP or IPX/SPX.

Timeout Value

is the number of minutes after which inactive terminals are disconnected. If inactive

terminals are not to be disconnected, this value is displayed as N/A.

Port

is the local TCP port number this process is using.

Banner Timeout Value

is the time (in minutes) after which a terminal can remain inactive following

presentation of the banner in the dynamic window. If this value is reached, any

inactive terminal is disconnected. If inactive terminals are not to be disconnected,

this value is displayed as N/A.

Total Services

is the number of services.

Max Terminals

is the maximum number of terminals that can be present in the system.