Telserv Manual

Subsystem Control Facility (SCF) Commands for

Telserv

Telserv Manual—427174-009

5-36

START WINDOW Command

The START WINDOW command initiates the operation of a window and places the

window in the STARTED summary state. You can use an object-name template with

this command.

Considerations for the START WINDOW Command

The considerations contain information about command use that should be read before

studying the command syntax in detail.



The START command is a sensitive command.



The START command will complete successfully only if the object is in the

STOPPED summary state.



Use the STOP or ABORT command to terminate the operation of windows.

Examples of the START WINDOW Command

The examples are designed to show correct ways of specifying command syntax.

The following command starts all windows under the assumed process.

START WINDOW *

The command below starts the window #WN1 under the assumed process.

START WINDOW #WN1

The next command starts the window #WI34 under the $ZTNT process.

START WINDOW $ZTNT.#WI34

STATS Command

The STATS command displays statistical information for the specified object. The time

stamp for the reset is recorded. You can use an object-name template to specify

windows with this command.

START [ / OUT file-spec / ] WINDOW window-name

STATS [ / OUT file-spec / ] [ object-spec ]

[ , SUB [ NONE | ALL | ONLY ] ] [ , RESET ]