TFDS Manual

Using TFDS
Tandem Failure Data System (TFDS) Manual—520628-003
2-5
Monitoring TFDS Status
STATUS Example
•
To view recent TFDS processing history, including the processing of CPU DOWN
messages or software instrumentation call events, use the TFDSCOM HISTORY
command described on page 4-26.
HISTORY Example
The following example shows TFDS initialization messages and processing of a halted
processor:
TFDS current environment: @01/06/11 08:41:31
Failures are recorded since TFDS started at 01/06/11 08:40:28
CPU CPU CPU CPU Time of Last Time of Last
No State Status Dn R1 Failure Load
-- ------- -------- ----- ----- ----------------- -----------------
0 Up Enabled 0 0 N/A 99/05/12 16:59:23
1 Up Enabled 0 0 N/A 99/05/12 17:01:44
2 Up Enabled 0 0 N/A 99/05/12 17:01:52
3 Dumping N/A 1 0 99/05/14 07:25:56 N/A
AUTORELOAD OFF
AUTOSTIFLE 03 Times in 24 Hours
06/25 14:10 Started at 2001:06:25:14:10:45:083:301:
06/25 14:10 Starting TFDS Primary in cpu 0
06/25 14:10 Starting TFDS Backup in cpu 1
06/25 14:10 config file $SYSTEM.ZTFDS.TFDSCONF opened
06/25 14:10 TRACE-FILE Reassigned to $DATA00.T6523ABE.TRACEFIL
06/25 14:10 PROCESSOR 4, no response during TFDS initialization
06/25 14:10 PROCESSOR 5, no response during TFDS initialization
06/25 14:10 PROCESSOR 6, no response during TFDS initialization
06/25 14:11 CPUDOWN=3
06/25 14:11 BDONR/01001 AS3 ASH24 ARD100 RD2 MCD1 RR2 TNS G05
T6523G05_01AUG2001_TFDSABE
06/25 14:11 Analyzing State 1
06/25 14:11 Lauching Garth For Analysis
06/25 14:11 Started $SYSTEM.ZGARTH.GARTHNSK
06/25 14:11 Garth analysis - state 2
06/25 14:12 Garth analysis - state 3
06/25 14:12 Garth analysis - state 4
06/25 14:12 Dump filename selected is $SYSG03.ZDMP0019.CPU03
06/25 14:12 (19)Startup message '$SYSG03.ZDMP0019.CPU03,03, X,PRIME,
RESET'
06/25 14:12 (19)RCVDUMP mes=GUARDIAN RCVDUMP - T9050G05 - (Jan 17 1998,
05:22:18)
06/25 14:12 (19)RCVDUMP mes=Primed CPU # 3 for Bus dump.
06/25 14:12 (19)RCVDUMP mes=Dump started, CPU # 3, path 0 (X).
06/25 14:15 (19) DUMP COMPLETED ok
06/25 14:15 (19) FUP dupping of auxillary files beginning for incident
06/25 14:15 Reload 3
06/25 14:15 (19) Reloading for CPU (3) starting
06/25 14:15 (19) RELOAD: NONSTOP OS PROCESSOR RELOAD-T9050G05-(15FEB00)
06/25 14:16 (19) RELOAD: Starting system services on cpu 3
06/25 14:16 CPU 3 is UP
06/25 14:16 (19) RELOAD: Services started successfully
06/25 14:16 (19) RELOAD: CPU 3: reloaded.
06/25 14:16 (19) FUP DUPping of files COMPLETED for incident
06/25 14:16 (19) Candidate dump location=$SYSG03.ZDMP0019.*
06/25 14:16 (19) --Closing incident--
06/25 14:16 (19) --Processing Completed for incident--
******** End of data ********