TFDS Manual

Using TFDSCOM Commands
Tandem Failure Data System (TFDS) Manual—520628-003
4-16
CPUS
CPUS
The CPUS command makes the transition from TACL to TFDS easier. It is an alias for
the STATUS command.
For guidelines and examples, see STATUS on page 4-36.
DB-SUBVOL
The DB-SUBVOL command specifies the location in which TFDS creates or finds the
incident database.
volume
is the name of a volume. The default volume is $system.
subvolume
is the name of a subvolume. The default subvolume is ztfds.
Guidelines
•
You can use the abbreviation db in place of DB-SUBVOL.
•
If the database location is not provided, TFDS uses the default location where
TFDS is running.
Example
This example changes the location of the TFDS incident database:
DB-SUBVOL $DATA.TFDSDB
DETAIL
The DETAIL command retrieves one detail record from the incident database.
rec-num
is the record number in the incident database, obtained using the REPORT
command.
CPUS
DB-SUBVOL volume.[ subvolume ]
DETAIL rec-num