TFDS Manual

Using TFDSCOM Commands
Tandem Failure Data System (TFDS) Manual—520628-003
4-25
HELP
ON
turns on FMD. This value is the default if your system has a processor size greater
than 2 gigabytes.
OFF
turns off FMD. This value is the default if your system does not have a processor
size greater than 2 gigabytes.
Guidelines
•
You can use the abbreviation fd in place of FMDUMP.
•
As the name implies, the FMD feature speeds up the dumping of halted
processors. Disabling this feature significantly increases the amount of time the
halted processor is unavailable to the system.
•
For more information on FMD-related commands, see Appendix F, Fast Memory
Dump.
•
For information about using the FMD feature, see System Resource Usage on
page 2-3.
HELP
The HELP command displays the syntax for TFDSCOM commands.
HELP
displays a list of all TFDSCOM commands.
HELP command
displays a brief description of all TFDSCOM commands.
HELP document
displays detailed information for all TFDSCOM commands.
HELP command_name
displays information for the specified command. You can also enter an abbreviation
instead of the entire command name.
HELP [ command ]
[ document ]
[ command_name ]
[ events ]