TFDS Manual

Using TFDSCOM Commands
Tandem Failure Data System (TFDS) Manual—520628-003
4-29
MAXCONDUMPS
rec-num
is the record number in the incident database.
Guidelines
•
You can use the abbreviation inc in place of INCIDENT.
•
The DUMPOVERRIDE flag is cleared after a duplicate incident is processed and
the dump is acquired.
MAXCONDUMPS
Use the MAXCONDUMPS command to indicate the number of concurrent processor
dumps that TFDS should be allowed to initiate.
num-condumps
is the maximum number of concurrent dumps that TFDS is allowed to perform. The
dump range is 1 through 4. The default value is 1.
Guidelines
•
You can use the abbreviation mcd in place of MAXCONDUMPS.
•
Once the maximum number of concurrent dumps is reached, subsequent halted
processors are not dumped. They remain down or are reloaded without a dump,
depending on the AUTORELOAD setting.
MAX-DB-ENTRIES
Use the MAX-DB-ENTRIES command to specify the number of records that TFDS
allows in the incident database.
number-of-records
is the maximum number of records that TFDS attempts to put in the incident
database. The number range is 64 through 1024. The default value is 500.
MAXCONDUMPS num-condumps
MAX-DB-ENTRIES number-of-records