TFDS Manual

Tandem Failure Data System (TFDS) Manual—520628-003
D-1
D EMS Messages and Templates
The Event Management Service (EMS) receives and logs information about important
events that occur in TFDS and the TFDSCOM user interface. This section describes
each standard TFDS event reported through EMS.
The message descriptions provide:
•
Message text
•
Cause of the message
•
Effect on the system
•
Suggested recovery strategy
TFDS event messages can be identified by the subsystem name DMP. These event
messages include:
•
Incident errors generated by either a halted processor or a subsystem
instrumented with the TFDS run-time library (See messages 6000, 6001, and
7000, beginning on page D-11.)
•
TFDS configuration file errors (See message 20 on page D-7.)
•
Processing abnormalities (See message 21 on page D-8.)
•
Normal TFDS processing status information (all other TFDS messages)
If you are developing or customizing operator messages for TFDS, see Templates for
EMS Support on page D-14.
Online Help for TFDS Events
To get online help for all TFDS events, in the TFDSCOM interface, enter:
help events