TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-4
EMS Messages
RETRY-DUMP, RELOAD-ON-FAILURE, AUTORELOAD, and RETRY-RELOAD
configuration settings.
Recovery. Informational message only; no corrective action is needed.
8
Cause. A reload process has been started.
Effect. If followed by TFDS event message #10, Successful RELOAD, the processor
is operational. If not, TFDS continues attempts to reload the processor according to
your RETRY-RELOAD configuration setting.
Recovery. Informational message only; no corrective action is needed.
9
Cause. The RCVDUMP ended successfully.
Effect. A dump file was created. Upon completion of the RCVDUMP, TFDS attempts
to reload the affected processor if the AUTORELOAD configuration setting is ON.
Recovery. Informational message only; no corrective action is needed.
10
Cause. The reload process ended successfully.
Effect. The processor is operational.
Recovery. Informational message only; no corrective action is needed.
11
Cause. Not enough disk space is available on the specified volume, and TFDS has
not been configured to search for and use an alternate volume. (Both the default
volume and alternate volume capability are specified with the TFDSCOM
DUMPVOLUME command.)
Effect. A dump file is not created. TFDS retries the dump, as specified by the RETRY-
DUMP configuration setting. The RELOAD-ON-FAILURE option of the RETRY-DUMP
TFDS *0008* $ZDMP : RELOAD; Starting a RELOAD for CPU : nn
TFDS *0009* $ZDMP : DUMP; Successful ReceiveDump for CPU : nn
TFDS *0010* $ZDMP : RELOAD; Successful RELOAD for CPU : nn
TFDS *0011* $ZDMP : DUMP; Unsuccessful ReceiveDump for CPU :
nn