TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-5
EMS Messages
command determines whether TFDS automatically reloads the processor after
exhausting the specified number of retries, or the processor remains down (which
allows you to find disk space and request the dump through TFDSCOM).
Recovery. If the RELOAD-ON-FAILURE option described previously has not been
specified, you can enable more disk space and request the dump through TFDSCOM,
or reload the processor manually.
12
Cause. The reload process failed.
Effect. The processor is down. TFDS continues attempts to reload the processor
according to your RETRY-RELOAD configuration setting.
Recovery. If TFDS fails to automatically reload the processor, perform the reload
manually.
13
Cause. An operator has started TFDS.
Effect. TFDS is starting up.
Recovery. Informational message only; no corrective action is needed.
14
Cause. A new incident is stored in the incident database.
Effect. Data collection is not performed on this problem again. The affected
processors are dumped and reloaded automatically.
Recovery. Informational message only; no corrective action is needed.
TFDS *0012* $ZDMP : RELOAD; Unsuccessful RELOAD for CPU : nn
TFDS *0013* $ZDMP : TFDS Starting in CPU : nn
TFDS *0014* $ZDMP : Product #nnnn, Halt Code %nnnnnn CPU #nn
New Problem Logged, File(s) Located at xxxxxxxx
Symptom String : xxxxxxxx
Version Info : xxxxxxxx
Resource Name : xxxxxxxx
Source File Name : xxxxxxxx
Company Name : xxxxxxxx