TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-6
EMS Messages
15
Cause. A recurrent problem was discovered.
Effect. Data collection is not performed on this problem, and the number of
occurrences of this problem is tabulated. The affected processors are reloaded
automatically.
Recovery. Informational message only; no corrective action is needed.
16
Cause. A RCVDUMP process that TFDS started failed to finish.
Effect. A new RCVDUMP process is started. TFDS continues attempts to get a
successful dump and automatically reloads the processor according to your
RETRY-DUMP, RELOAD-ON-FAILURE, AUTORELOAD, and RETRY-RELOAD
configuration settings.
Recovery. Informational message only; no corrective action is needed.
17
Cause. A reload process that TFDS started failed to finish.
Effect. A new reload process is started. TFDS continues attempts to reload the
processor according to your RETRY-RELOAD configuration setting.
Recovery. If TFDS fails to automatically reload the processor after the retries
specified by RETRY-RELOAD, the processor remains down until it is manually
reloaded.
TFDS *0015* $ZDMP : Product #nnnn, Halt Code %nnnnnn CPU #nn
Recurrent Problem Logged, File(s) Located at xxxxxxxx
Symptom String : xxxxxxxx
Version Info : xxxxxxxx
Resource Name : xxxxxxxx
Source File Name : xxxxxxxx
Company Name : xxxxxxxx
TFDS *0016* $ZDMP: RCVDUMP of CPU nn Failed. Attempting Retry
Number: nn
TFDS *0017* $ZDMP: RELOAD of CPU nn Failed. Attempting Retry
Number: nn