TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-7
EMS Messages
18
Cause. The number of processor failures is greater than the number of concurrent
dumps allowed by the current TFDSCOM MAXCONDUMPS configuration setting.
Effect. A reload process is started for the specified processor. It is not dumped. If the
reload is successful, the processor is operational.
Recovery. Informational message only; no corrective action is needed.
19
Cause. Internal error was detected in TFDS.
Effect. The effect depends on the error that occurred. In general, this message does
not indicate a problem for your system.
Recovery. Report this message to your service provider and provide all relevant
information:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message or messages generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a processor dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and product versions of
all related products as well.
20
Cause. An error was detected in the TFDS configuration file during TFDS initialization.
The line number and specific error are displayed.
Effect. A default value is assigned to the configuration option not properly specified.
Recovery. Use the TFDSCOM CONFIG command to view the TFDS configuration file,
and use TFDSCOM commands to edit the TFDS configuration file as needed.
TFDS *0018* $ZDMP: Too many concurrent CPU dumps.
Reloading CPU: nn
TFDS *0019* TEXT: xxxxxxxx
TFDS *0020* Configuration Error: xxxxxxxx