TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-8
EMS Messages
21
Cause. A noncritical error occurred during TFDS processing. For example, if a
RELOAD command is issued while TFDS is analyzing a halted processor, an error
results.
Effect. Normally, TFDS terminates incident processing at the point the error is
encountered.
Recovery. Determine the cause of the error and correct it.
22
Cause. This message indicates routine TFDS operational status.
Effect. You can view these messages in the event log to determine the current status
of TFDS (or use the TFDSCOM HISTORY command).
Recovery. Informational message only; no corrective action is needed.
23
Cause. A RCVDUMP process started by TFDS has returned a routine status
message.
Effect. To determine the current status of the dump, view these messages in the EMS
event log.
Recovery. Informational message only; no corrective action is needed.
24
Cause. A RELOAD process started by TFDS has returned a message.
Effect. To determine the current status of the reload, view these messages in the EMS
event log.
Recovery. Informational message only; no corrective action is needed.
TFDS *0021* Processing Anomoly: xxxxxxxx
TFDS *0022* Processing Status: xxxxxxxx
TFDS *0023* Dump Status: xxxxxxxx
TFDS *0024* Reloading Status: xxxxxxxx