TFDS Manual

EMS Messages and Templates
Tandem Failure Data System (TFDS) Manual—520628-003
D-10
EMS Messages
Effect. N.A.
Recovery. N.A.
30
Cause. As TFDS starts, it reads the configuration file and communicates with the Non-
stop Kernel to determine information about the hardware environment.
Effect. To determine the current status of the TFDS configuration, view these
messages in the EMS log.
Recovery. Informational message only; no corrective action is needed.
31
Cause. TFDS sent a status message related to the Garth process that it started.
Effect. To determine the current status of the Garth process, view the status
messages in the EMS log.
Recovery. Informational message only; no corrective action is needed.
32
Cause. TFDS sent an error message related to the Garth process that it started.
Effect. To determine the current status of the Garth process, view the status
messages in the EMS log.
Recovery. Informational message only; no corrective action is needed.
99
Cause. An internal error occurred in TFDS.
Effect. The effect depends on the error that occurred. In general, this message does
not indicate a problem for your system.
Recovery. Report this message to your service provider and provide all relevant
information as follows:
TFDS *0030* TFDS Config Status: xxxxxxxx
TFDS *0031* Garth Status: xxxxxxxx
TFDS *0032* TFDS Garth Error: xxxxxxxx
TFDS *0099* $ZDMP:
INVALID Event Management System Message Number