TFDS Manual

Debugging TFDS Errors
Tandem Failure Data System (TFDS) Manual—520628-003
E-3
Online Help for TFDS Debugging Commands
Online Help for TFDS Debugging Commands
To get online help for TFDS debugging commands, in the TFDSCOM interface, enter:
help trace
If TFDS does not find Garth, or if you want to find a different Garth, use the
GARTH_FILE command.
GARTH_FILE
Use this command to specify the file TFDS is to use to run the GARTH process (for
post-G05.00 RVUs).
filename
represents a Guardian filename.
Guidelines
•
Use this command only as directed by Development.
•
If the file name is not fully qualified, the volume/subvolume defaults to the
volume/subvolume where TFDS is running.
•
This command is a configuration file command.
GARTH_FILE filename