TGAL Manual

BOTTOMMARGIN Command

TGAL Commands

2–8 060865 Tandem Computers Incorporated

BOTTOMMARGIN

Command

Use the BOTTOMMARGIN command to define the size of the bottom margin on a

page. The BOTTOMMARGIN command does not alter the placement of the lines on

which the FOOT command and SECT command print in relation to the last line of text.

The lines on which the FOOT command and SECT command print remain on the

second and third lines from the last text line respectively.

The syntax of the BOTTOMMARGIN command is:

BOTTOMMARGIN

number

specifies the number of lines to space after the last line of text. This number can be

any number from 6 to 30.

Considerations

You must set the PAGELEN command to a value that can contain the

BOTTOMMARGIN, the TOPMARGIN, and at least one line of text.

If you do not use this command, TGAL assumes:

BOTTOMMARGIN 6

Example

This example shows using the BOTTOMMARGIN command to add a bottom margin

to the bottom of every printed page. Notice in the example the FOOT and SECT

commands appear within the boundaries of the bottom margin. If you enter:

\BOTTOMMARGIN 10

TGAL produces:

Purpose

This research is to serve as the foundation concept in

stress management. Everything from the building to the cafeteria

has been examined with respect to the mice results. The

implementation of this total program is to begin with the

construction of a new building with a controlled environment.

Equipment

This project required 200 mice with various deficiencies, 20 mice

houses, and 50 recordings of music.

Stress Management Report

BOTTOMMARGIN

1-1