TGAL Manual

TAG Command
TGAL Commands
060865 Tandem Computers Incorporated 2–69
Considerations
The version from the VERSION command must match the footing from the TAG
command before TGAL prints the vertical bar in the margin.
It is possible to change the default characters used by TGAL for tagging using the
CHANGES command with the new character.
When the argument to the TAG command is ON, B, or trigger, TGAL counts input
lines until it sees the corresponding OFF command, blank line, or command line.
If line joining is on, and the length of the input lines is substantially different from
the line length, the resulting number of output lines might differ from the number
of lines TGAL counts. For this reason, the number of lines kept together by the
NEED command or tagged might be incorrect.
If you do not use this command, TGAL assumes:
TAG" "OFF
Example
This example shows using the TAG command to define the version of the document.
You use the TAG command with the VERSION command. If you enter:
\TAG "A2" ON
...text...
\TAG "A2" OFF