TMF Management Programming Manual (G06.24+)

Commands and Responses
HP NonStop TMF Management Programming Manual—522420-002
5-130
RECOVER FILES
Tokens in Command Buffer
ZTMF-TKN-FILESET
specifies a file to be recovered. This token is required; multiple occurrences are
allowed.
ZTMF-TKN-FILESET can also contain a wild card (value “*”, length 1). If the wild
card is specified, it must be the only instance of this token in the command buffer.
The wild card specifies that all files on the physical volume(s) designated by the
ZTMF-TKN-TOPHYSVOL or ZTMF-TKN-WHEREPHYSVOLIS token are to be
recovered.
ZTMF-TKN-NOTFILESET
specifies one or more audited files that are not to be recovered regardless of their
redo-needed or undo-needed status. This token is optional; multiple occurrences
are allowed.
ZTMF-TKN-TOPHYSVOL
specifies the physical target volume on which TMF should place the recovered
files. This token must be specified if the value of the ZRECOVERVDPPHASE1
field is TRUE; only one occurrence is allowed. If you include both this token and
the ZTMF-TKN-WHEREPHYSVOLIS token, ZTMF-TKN-WHEREPHYSVOLIS
takes precedence..
ZTMF-TKN-WHEREPHYSVOLIS
specifies the physical volumes where the files specified by ZTMF-TKN-FILESET
are stored. This token is optional; multiple occurrences are allowed. If you include
both this token and the ZTMF-TKN-TOPHYSVOL token, this token takes
precedence..
ZTMF-MAP-RECOVER-FILES
is an extensible structured token that contains parameters for performing file
recovery. This token is required; only one occurrence is allowed. This token
contains the following fields:
Caution. The ZTMF-TKN-TOPHYSVOL token is intended for use with NonStop Storage
Management Foundation (SMF) files only. Before you issue a RECOVER FILES command
with this token, it is vital that you read the discussion “Options for the SMF Product” under the
RECOVER FILES command description in the TMF Reference Manual..
Caution. The ZTMF-TKN-WHEREPHYSVOLIS token is intended for use with NonStop
Storage Management Foundation (SMF) files only. Before you issue a RECOVER FILES
command with this token, it is vital that you read the discussion “Options for the SMF Product”
under the RECOVER FILES command description in the TMF Reference Manual..