TMF Management Programming Manual (G06.24+)

Commands and Responses
HP NonStop TMF Management Programming Manual—522420-002
5-153
STATUS AUDITTRAIL
ZTMF-TKN-RDFREQUESTERNAME
is the name of the RDF environment that has the audit trail pinned. This token is
present when RDF is the holding reason (ZHOLDINGRENAMEREASON contains
the value HELDRSNRDF).
ZTMF-MAP-STATUS-AUDITTRAIL
is an extensible structured token containing information about the current state of
the active audit trail. This token contains the following fields:
ZOVERFLOWINUSE
indicates whether the overflow space for the audit trail is currently in use. The
following values are possible:
ZCAPACITYINUSE
indicates the percentage of the active audit trail that is currently in use.
ZCANNOTROLLOVER
if true, indicates that the audit disk process cannot find an available audit-trail
file when the current file has become full.
ZAUDITHOLD
if true, indicates that TMF is not allowing further audit generation because
there is very little room left in the audit trail. This condition must be alleviated
by either adding an overflow-audit volume or increasing the audit-trail capacity.
ZHOLDINGRENAMEREASON
indicates the reason the audit-trail file that is defined by ZTMF-TKN-
HELDFILENAME is still needed by TMF. The following values are possible:
ZSPI-VAL-TRUE The overflow space is currently in use.
ZSPI-VAL-FALSE The overflow space is currently not in use.
Value (ZTMF-VAL- ) Description
HELDRSNUNKNOWN The TMP has not had enough time to determine
why the oldest file is held on disk. This
message is displayed for a brief period after
TMF is started and reports a state that lasts
only briefly.
HELDRSNCURRENT The audit-trail file is currently receiving audit
records.
HELDRSNNOTDUMPED An audit dump process has been configured for
this audit trail, and this file has not yet been
copied to dump media.